Ornamental Floating Fish feed Pellet equipment
Brand :XI LANG
Product origin :Jinan，China
Delivery time :20days
Supply capacity : 100 sets per month
1. Xilang ornamental fish feed production line adopts advanced twin screw extrusion technology. Adjusting the puffing degree of the equipment can control the feed floating time in the water, so as to produce different floating and sinking characteristics of high quality special fish food, to adapt to different fish.
2. The whole line of equipment adopts food grade stainless steel material, which is sanitary and environmental friendly. The mold is changed to produce fish food of different shapes. The diameter of the product is 1-10mm, which meets the feed needs of different stages of fish from young to adult.
3. Less investment, high yield, small footprint, but also suitable for dogs, cats, foxes, birds and other kinds of feed production, is the ideal choice to invest in pet feed industry.
1.Product Description of Ornamental fish pellet feed production line
Brief introduction for Floating Fish feed Pellet equipment:
fish feed machine can be Widely used in the production of fish and shrimp , crabs , abalone , sea cucumbers and various ornamental fish feeds. It is and ideal choice for manufactures with rigid requirements. The whole machine is made of stainless steel which can ensure hygiene and cleanliness. The technology uses internationally advanced twin screw extrusion technology.
Adopts corn flour, rice flour, soybean meal, fish meal, meat meal, cereal flour etc.
The diameter of the product is divided into 0.5-20mm, which can meet the needs of different stages of feed from seedling to adult fish.
2.The technical specification of Aquatic fish feed making machine
The power of main machine
Loading power of production line
Actual consumption electric
3.Flow Chart of Aquatic fish feed production line:
The Whole Process line:
raw material preparing-mixing-extrusion puffing-drying-oil spray seasoning-cooling-packaging
powder mixer-screw conveyor-modulator-twin screw extruder-air conveyor-dryer-double drum seasoning machine-cooler
Process composition of ornamental fish feed production line:
Mixer: Add a certain proportion of water to the raw materials,fully mix it evenly.
The motor is used for screw conveying, and the mixed raw materials are conveyed to the feeding hopper of the twin-screw extruder. This equipment is convenient and quick to load materials, saves labor, and has high efficiency.
Under the conditions of high-temperature and high-pressure and twin-screw extrusion, the starch structure in the raw materials changes to become easily absorbed nutrients, which are extruded through the feed mold and cutted by the speed adjustable rotary cutting machine. the feed pellets get the same size and length.
Air Conveyor: convey the produced feed pellets to the multi-layer drying equipment.
The oven is divided into electric oven, oil-fired oven, gas oven and steam oven. The temperature is adjusted between 0 and 200 degrees through the control cabinet. The inside of the oven is stainless steel mesh belt, which is stable in conveying and has low failure rate. The feed pellets pass through a multi-layer S-shaped track cycle to dry the feed pellets to a safe moisture content, increasing the shelf life.
Spraying seasoning line:
The oil sprayer sprays oil attractant, The seasoning tube spraying grease on the surface of the feed and spraying at the same time Sprinkle the minced meat and spices evenly. This process can also remove the burrs and burrs on the surface of the feed pellets, making the surface of the feed pellets smoother.
Reduce the surface temperature of the dried feed pellets, promote the solidification of grease, reduce the pellet temperature, and facilitate packaging.
Vibrating seive: Sift out the excess sprinkled materials and granular slag, while maintaining the quality, the reuse of raw materials is achieved.
Packaging machine: manual sealing machine and automatic packaging machine can be used.
1)Pure copper motor, low heat, sufficient power and stable performance
2)The control cabinet adopts a visual automatic temperature control system, the temperature of each zone can be adjusted separately, the temperature control is intuitive, and the parameters are accurate
3)Double spiral in the same direction, controlled by a separate control cabinet
4)The screw is made of high wear-resistant materials with hardness above HRC55 and has a long service life
5)International brand power supply devices, strong stability, can run continuously for more than 700 hours
6.Packing and Shipping
1.Inner packing: Stretch film
2.Outside packing: Standard export wooden cases
3. The package also can be according to customer requirements.
Jinan Xilang Machine Co.,ltd is a professional Manufacturer specializing in researching and producing Extrusion machinery,Industrial microwave drying and sterilizing equipment and related ancillary equipment.The Company is located in Jinan,the spring city of Shandong. With the strong design strength,advanced producing technology and rich manufacturing experience,the company`s products get good comments from domestic and abroad customers.
Our main products include machinery and equipment for pasta system, corn flakes system, breakfast cereal system, baby food system, corn puff snacks system, fried pellets system, fortified nutrition rice system,soy nuggets system, pet food system , fish feed system , various type drying oven system, corn meal milling system etc.
Our machines have been exported to many countries of Asia, America, Africa, Europe etc. So Don't hesitate to contact us. Xilang team from pre -service to after-service will show your choice is worth it.
Q1: Are you a trade company or a manufacturer?
A1:We are a manufacturer,we have own factory and R&D department.SGS has certified our company on site.welcome to visit our factory and check the machines.
Q2: How long is your delivery time?
A2: Generally it is 5-10 days if the goods are in stock. or it is 20-35 days if the goods are not in stock, we could discuss before contract.
Q3: Could you supply all the parameters about the machines?
A3: Yes, we will supply all the parameters, price, layout drawing, factory design etc.
Q4. Can you provide food or feed formula?
A4: We can provide basic formula for produce the food etc. And help customer to produce new products according to customer’s formula.
Q5: What is your terms of payment ?
A5: 30% T/T in advance ,70% balance before shippment after inspection.
Q6: How about the after-service?
A6: We will send 1 engineer to the buyer's factory for 7-14 days period installation and training to the operators.